Bow Shaker Snowglobe Tumbler (STL FILE)

Fun 3D-printable Shaker designed specifically for 16oz Snowglobe tumblers / Glass Can

What you’ll get

• STL file (ready for slicing)

• 3MF file (includes print settings -Creality)

• Cut template for acetate/clear vinyl (for use with cutting machines)

• Use hand-cutting acetate if you don’t have a cutter

Important details

• Fits only 16oz Snowglobe tumblers with lids located on the side.

• Acetate/clear vinyl not included — you will need a sheet found on Amazon or Craft Stores

• Template is provided for cutting by machine; hand-cutting is also possible using the included pattern.

• This digital file is for personal use only. You may not resell, redistribute, or modify the file.

Printing recommendations

• Material: PLA or PETG recommended for ease of printing and durability.

• Layer height: 0.2 mm for a good balance of detail and print time.

• Infill: 15–25% should be sufficient.

• Supports: May be required depending on orientation; review the 3MF print settings included.

• Bed adhesion: Use a heated bed (50–60°C for PLA) and/or glue stick if needed.

Acetate/clear vinyl tips

• Use thin acetate (0.1–0.2 mm) for best fit and flexibility.

• If cutting by hand, print the template at 100% scale, attach acetate over the pattern, and cut carefully with a sharp craft knife and metal ruler.

• For cutting machines, load the provided file and test the cut on scrap material first to set blade depth.

License and usage

• Personal use only. No commercial resale or redistribution.

• Do not upload, share, or modify the files.

Deliverables are digital. No physical item will be shipped.